Overview
The Original Super Glue Quick Setting Epoxy is a two-part all-purpose epoxy adhesive that sets in 4–6 minutes, allowing time for initial positioning before handling at 30 minutes and full strength at 24 hours.
Rated at 1,200 psi shear strength on steel. Cures clear to light yellow.
Specifications
SKU: SY-QS
Volume: 6g
Set Time: 4–6 minutes at room temperature
Handling Time: 30 minutes
Full Cure: 24 hours
Shear Strength (Steel): 1,200 psi (±20%)
Maximum Gap Fill: 6.35mm (0.25")
Hardness (Shore D): 75–83 (full cure)
Operating Temperature: -40°C to +80°C
Initial Colour: Clear hazy to light yellow
Final Colour: Light yellow
Volume: 6g
Set Time: 4–6 minutes at room temperature
Handling Time: 30 minutes
Full Cure: 24 hours
Shear Strength (Steel): 1,200 psi (±20%)
Maximum Gap Fill: 6.35mm (0.25")
Hardness (Shore D): 75–83 (full cure)
Operating Temperature: -40°C to +80°C
Initial Colour: Clear hazy to light yellow
Final Colour: Light yellow
Features
- Sets in 4–6 minutes — allows time for repositioning before bond firms.
- 1,200 psi shear strength on steel — strong all-purpose bond.
- Gap filling — bridges gaps up to 6.35mm (0.25")
- Shockproof when cured — resists impact and vibration.
- Suits ceramic, china, fibreglass, glass, metal, most plastics, fabric, tile, and wood.
Fitment / Notes
- Surfaces must be clean, dry, and free from oil and grease before application.
- Roughen surfaces with emery cloth or sandpaper for best results.
- Mix thoroughly until colour is uniform before applying.
- Apply to both surfaces and press together.
- Remove excess immediately with denatured alcohol.
- Note: Not suitable for polyethylene, polypropylene, or flexible plastics.