Overview
The Original Super Glue Delayed Setting Epoxy is a two-part epoxy adhesive with a 30-minute working time for complex assemblies where extended positioning is required.
Rated at 2,000 psi shear strength on steel and 1,400 psi on aluminium. Cures clear to light yellow.
Specifications
SKU: SY-SS
Set Time: 30 minutes at room temperature
Handling Time: 7 hours
Full Cure: 24 hours
Shear Strength (Steel): 2,000 psi (±20%)
Shear Strength (Aluminium): 1,400 psi (±20%)
Maximum Gap Fill: 6.35mm (0.25")
Hardness (Shore D): 75–83 (full cure)
Operating Temperature: -54°C to +107°C
Initial Colour: Clear hazy to light yellow
Final Colour: Light yellow
Set Time: 30 minutes at room temperature
Handling Time: 7 hours
Full Cure: 24 hours
Shear Strength (Steel): 2,000 psi (±20%)
Shear Strength (Aluminium): 1,400 psi (±20%)
Maximum Gap Fill: 6.35mm (0.25")
Hardness (Shore D): 75–83 (full cure)
Operating Temperature: -54°C to +107°C
Initial Colour: Clear hazy to light yellow
Final Colour: Light yellow
Features
- 30-minute working time — allows complex assemblies to be arranged and rearranged before setting.
- Higher 2,000 psi shear strength — stronger bond than quick-set formula, suited to metal, glass, and structural applications.
- Wider operating temperature range (-54°C to +107°C) — suited to more demanding environments.
- Gap filling — bridges gaps up to 6.35mm (0.25").
- Shockproof when cured — resists impact and vibration.
- Suits ceramic, fibreglass, glass, leather, metal, most plastics, and wood.
Fitment / Notes
- Surfaces must be clean, dry, and free from oil and grease before application.
- Roughen surfaces with emery cloth or sandpaper for best results.
- Mix thoroughly for approximately 1 minute until colour is uniform.
- Apply to both surfaces and press together.
- Remove excess immediately with denatured alcohol.
- Note: Not suitable for polyethylene, polypropylene, or flexible plastics.